1, before repairing the car, we should first fix the car, so as to prevent the multi-functional jack supplier from causing harm to the car and people in the process of lifting the car.

2, qianjin top should be cleaned and tidy before application, and should detect whether the components are convenient, there is no damage. Hydraulic machine dry jins top oil valve, piston rod, sealing ring is intact, hydraulic oil is clean.

3, hydraulic jack must be on the hard flat road, if separate car accident jack supplier make people bad, in the soft road or stone material can be applied to solid wood board under the point at the top of the hydraulic one thousand jins ensure dry point view on the top of the jin, is not the same as the natural environment have different way, but you have to make sure dry on the top of the jin is in order.

4, the application of hydraulic top is usually the use of hand lift, in the use of the strength must be symmetrical, remember too fast too fierce. Especially in the case of just touching the body, we must determine the specific position and stability of the hydraulic top.

5. Overload application of dry jins is prohibited, rocker can not be extended, and the total number of actual operation shall not exceed the requirements.

6, the lifting height of oil pressure dry catty top shall not exceed the positioning line; The lifting height of screw and rack and pinion hydraulic top shall not exceed 3/4 of the height of screw or rack and pinion.

7, the hydraulic top of the reduction rate must be slow, prohibit in the case of load so that it suddenly reduced.

8, with two or more than two hydraulic top lifting an object at the same time, the total lifting capacity of the dry top should not be less than two times the load.

9. It is not suitable for use in workplaces with strong acid and alkali and corrosive air.

Common problems in the application of horizontal dry catkins