Hydraulic jack is to complete the crane for lifting or change basically, special tools, generally in the transport of important machinery and equipment, installation, dismantling the process is often applied to the maintenance, the level is also commonly used for petrochemical equipment, steel metallurgical industry, engineering and construction of highway bridge, the mining of the concrete, Ships and heavy machinery manufacturing and other fields.

In the operation level of the corresponding principle, mainly according to the basic basic theory of the hydraulic press, increase the pressure at any point in the static liquid, will be the same size pressure to the point all azimuth transmission.

This means that when several hydraulic cylinders are applied, each cylinder will be pushed or pulled at a separate speed, and this speed is the pressure required to move the load. Under the same bearing capacity category of hydraulic cylinders, the hydraulic cylinders bearing small loads will move, and the hydraulic cylinders bearing heavy loads will move later. In order to ensure that the hydraulic cylinder is jacked up at the same speed at any point, it is necessary to apply pressure regulating valve or software components of the jacking system at the same speed in the system software.

The above is the detailed introduction of the relevant information about hydraulic jacks. I look forward to the above information will be of certain assistance to you. A lot of relevant information WILL be combed and published on the website successively.

The basic principle information of using hydraulic jack is introduced in detail