1. Before repairing the car, the first thing to do is to fix the car, so as to prevent the car from running off in the process of lifting and causing harm to the car and people. Fixed fixed car handbrake application is far from enough, the most appropriate way is to pull the hand brake at the same time will be manual car hanging into 1 gear or shift, automatic car will pull the handbrake stall drag to P file can.

2. The hydraulic jack must be placed on the hard flat road surface, if nature makes the car broken in the soft road surface or stone, you can apply the material solid wood board point under the hydraulic jack to ensure the support perspective of the hydraulic jack, different natural environment is different, but we must ensure that the hydraulic jack is appropriate. In addition, the spare tire can be put on the car chassis, if the hydraulic jack tragedy "day fold" also have spare tire can "pocket bottom".

3. The inner side of each side skirt has a hydraulic jack support point parallel to the side skirt. The clutch jack supplier can be touched by hand, so when using the hydraulic jack, it must be supported on a special support point. The support points are made of thick steel plates with high compressive strength. Other positions, such as the engine guard plate and the swing arm of the suspension, need to prevent the support of the hydraulic jack, because of its low compressive strength, and it is easy to cause unnecessary damage when running off course.

4. The application of hydraulic jack is usually the use of hand lifting, in the use of the force must be symmetrical, remember too fast too fierce. Especially in the case of just touching the body, we must determine the specific position and stability of the hydraulic jack, if the force is too strong it is very easy to put the hydraulic jack part and Angle of view tilt, and then down again to lift time-consuming, not as good as from the beginning of steady progress.

How do I use a horizontal jack