1. Immersion method: some small and medium-sized hydraulic jacks choose to soak in anti-rust oil, the thickness of the oil can be manipulated to do the temperature or viscosity of the anti-rust oil, so that the surface is attached with a layer of anti-rust oil.

2. Brush coating method: pay attention to the balanced coating on the surface of the hydraulic jack, large tonnage jack does not need to form deposition, but also need to pay special attention to prevent leakage coating.

3. Sprayer method: Some large and medium-sized antirust should not be soaked with oil, generally with about 0.7mpa working pressure of excessive air compression in the gas cleaning area to carry out spray painting. The sprayer method can be used with organic solvent diluent or chromatography antirust oil, which requires sound flame retardants and work safeguards.

Do a good job in the hydraulic jack anti-rust oil wipe work is the first step of rust prevention, there are also some to prevent rust operation must be done, such as on time to the hydraulic jack surface cleaning, immediately dry after cleaning, this method of operation can effectively prevent rust problems. More attention will be paid to economic development and the quality of the development trend of The Times, so the demand for weapons and equipment capacity will be higher, and the demand will turn to a steady increase, so it is inevitable that the growth rate of physical product demand will decline in the future. But everyone with hydraulic jack to expand as the key to the intensity of fixed assets investment is increasing, thus exacerbating oversupply, evil change mechanical engineering market environment, causes to lower the price to compete for the market order of vicious price competition, will not only reduce field gross margin, and will cause a shoddy evil change individual behavior, etc.

Anti-rust maintenance of horizontal jack - coated with anti-rust oil